DURABLE STRUCTURE: The heavy duty ball joint press kit is made of heavy forged steel with black oxide finish adapters. The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant. The bushing press kit can withstand long-term and massive use. FUNCTION: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency. EASY TO OPERATE: The ball joint removal tool is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. WIDE COMPATIBILITY: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four wheel drive (4WD) vehicles, as well as lightweight pickup trucks with press fit ball joints. The 4WD ball joint service kit allows service for 1967 to present 1/2 and 3/4 ton four-wheel drive vehicles with Dana 30 or 44 front axles (compatible with Ford, General Motors, Dodge, IHC, and Jeep vehicles). PACKAGE INCLUDED: 1 x Ball Joint Press (C-Clamp), 1 x Jack Screw (Forcing C-Screw), 1 x Installation Adapter, 1 x Removal Adapter, 1 x Installing Cup, 1 x Receiving Cup, 1 x Installation Cup Adapter, 3 x Receiving Tubes. SPECIFICATIONS: Installing Cup(3.6"L x 1-3/4"I.D. x 2"O.D.); Receiving Cup(2-1/2"L x 2"I.D. x 2.13"O.D.); Install Cup Adapter(0.8"L x 1.9"I.D. x 2-1/4"O.D.); Removal Adapter(1.06"L x 1/2"I.D. x 3"O.D.); Installation Adapter(1.1"L x 0.98"I.D. x 3.03"O.D.); 3 Receiving Tube(1-3/4"L x 1-3/4"I.D. x 2"O.D.)(1-3/4"L x 2-1/4"I.D. x 2-1/2"O.D.)(2.13"L x 2.7"I.D. x 3"O.D.). KINDLY NOTE: All products of our ball joint press kit have undergone rust prevention treatment, so there may be some anti-rust oil residue on the surface. If the box is damaged, it may be due to mishandling during the shipping process.
DASBET Ball Joint Removal Tool Kit | Ball Joint Press & U Joint Removal Kit

Features:

Heavy duty forged ball joint press kit is excellent for removal and installation of press-fit parts such as ball joints, U joint and brake anchor pins for most 2WD and 4WD cars and light trucks. Heat treated C clamp puller can excellent press rusted parts effortlessly.
This ball joint removal tool can be used to remove upper/lower ball joints, install upper/lower ball joints, remove/install brake anchor pin, disassemble/assemble universal U joints.
Use the ball joint press tool set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.


Package List:

1 x Ball joint Press (C-Clamp)
1 x Jackscrew (Forcing C-Screw)
Receiving Tube #1 2.25 L x 2.72 Inside x 3’’ Outside
Receiving Tube #2 1.75 x 2.25 x 2.5’’
Receiving Tube #3 1.75 x 1.75 x 2’’
Install Adapter 1.12 x 0.94 x 3’’
Remove Adapter 1.14 x 0.5 x 3’’
Installing Cup 3.67 x 1.75 x 2’’
Receiving Cup 2.5 x 2 x 2.25’’
Install Cup Adapter 0.84 x 1.87 x 2.25’’
1 x Carrying Case

Kindly Note:

Make sure you clean out the ball joint area before installing the new spherical bearings.
Remember to grease the threads before use, it makes it a lot smoother.

Application:

The heavy duty 4-wheel drive u joint removal tool is compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars. It allows service for 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).