『GPU Power Cable for HP DL580 DL585 DL980 G7 Server』10 pin port to plug into power distribution board, 8 pin(6+2) port to plug into video graphics card; 『Connector』Connector A: 10 pin male (The 10 pin end must connect with the 10 pin port on the power distribution board of HP DL580 DL585 DL980 G7 server.), Connector B: 2x 8 pin(6+2) male (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.); 『Compatibility』Only compatible with HP ProLiant DL580 DL585 DL980 G7, 360G6, 360G7, 380 G8, 380 G9 server, HP DL580 G8, DL580 G9, DL388 Gen9, DL580 Gen9, DL980 G7; 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(including connectors):25inches(63.5cm)(please check the image 4th for detailed dimension), Quantity: 1pcs, Self-adhesive tape*1pcs; 『Note』This cable was only designed for HP servers as listed in the 3rd point. If you connect it with other incompatible types, it will burn or damage the motherboard or hard driver and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it; Features:

The COMeap GPU Power Cable for HP DL580 DL585 DL980 G7 Server is used to connect HP Server power distribution board to graphics card.

Support:

Only HP ProLiant DL580 DL585 DL980 G7, 360G6, 360G7, 380 G8, 380 G9 server, HP DL580 G8, DL580 G9, DL388 Gen9, DL580 Gen9, DL980 G7;

Specification:

Cable Length: 25inches(63.5cm), please check the images for detailed dimension;

Connectors: 1x 10 pin male, 2x 8 pin(6+2) male

Including:

10 Pin to dual PCI-E 8 Pin(6+2) power cable *1pcs;

Self-adhesive tape*1pcs;

NOTE:

1. It is ONLY compatible with HP ProLiant DL580 DL585 DL980 G7 server;

2. The 8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.;

3. The 10 pin end must connect with the 10 pin port on the power distribution board of HP ProLiant DL580 DL585 DL980 G7 server;