🌡️ Impact and Heat Resistant: PolyLite 1.75mm ABS 3D printing filament is a durable material that minimizes jamming. With a Vicat Softening Temperature of 104˚C and strong mechanical properties, PolyLite ABS 3D printer filament is perfect for functional parts that need durability and high-temperature resistance. 🛠️ Enhanced Stability: PolyLite 1.75mm ABS 3D printing filament (Acrylonitrile Butadiene Styrene) is crafted from a specialty bulk-polymerized ABS resin, featuring significantly lower volatile content than traditional ABS. For outdoor applications requiring UV resistance, we recommend our UV-resistant ASA filament. 🔒 Moisture-Free: Polymaker 1.75mm ABS 3D printing filament is packaged in a vacuum-sealed resealable bag with desiccant and comes in a sturdy, sealed box for optimal printing performance and protection. ♻️ Cardboard Spool: Available in upgraded 3.0 packaging, featuring a fully recycled cardboard spool and box. ⚠️ Important Note: Pass the ABS 3D printing filament through the fixed hole after use to avoid tangling. A heated bed and suitable printing surface are necessary to prevent warping. Larger parts are more susceptible to warping on home printers, and the odor during printing is stronger than with PLA. Using a raft or brim, or slowing down the first layer, can help minimize warping. Polymaker PolyLite ABS 3D Printer Filament 1.75mm – Born to be Strong (Upgraded 3.0 Version Cardboard Spool Design) ABS 1.75 Filament Key Product Features: Engineered material with high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. Perfect for functional parts that require impact or hot temperature resistance; High stability with specialty bulk-polymerized ABS resin; Consistent color and dimensional accuracy realized with CCD line sensor technology; Carefully winded and dried and vacuum-sealed in a resealable ziplock bag with desiccant, no tangle or moisture issue; Cardboard spool and box are made of recycled materials that can be recycled directly after use, helping lessen plastic waste. ABS Filament 1.75mm Printing settings: Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s Bed Surface: PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength. Tips: Please pass the ABS 3D printing filament through the fixed hole to avoid tangles after use. Using raft or brim or reducing the speed for the first layer could help avoid warping ABS 1.75mm 3D Filament Specs: Material: Acrylonitrile Butadiene Styrene N.W: 1kg/3kg/5kg Filament Diameter: 1.75mm Spool Type: Recycled cardboard Dimensional Accuracy: 70% is within +/- 0.01, 97% is within +/- 0.02, 99% is within +/- 0.03, 99.9% is within +/- 0.04 ♥We promise to offer the best purchasing experience. Feel free to contact us via Amazon when you need help, and we will reply within 24 hours.