[Stable Speed, Sensitive Control]: This brushless motor controller can provide stable speed, sensitive braking, reverse gear control [Good performance]: 12-tube controller, dual-mode square wave; stronger climbing power, low motor running sound, and low tire noise [Low failure rate]: The wire and interface are very durable, ensuring long-term use and low failure rate. Suitable for electric bicycles, electric scooters, etc. [Good performance]: 12-tube controller, dual-mode square wave; stronger climbing power, low motor running sound, and low tire noise [Complete functions]: power supply, electric door lock, motor phase line, accelerator line, third gear line, low brake line, high brake line, general instrument line, etc. [After-sale service]: If you have any questions or suggestions about this product, please feel free to contact us by email; we will definitely give you a satisfactory solution. 48V-64V 1000W controller can work with hall sensor/hall sensorless
Rated Voltage: 48V-64V
Low Voltage : 41V±0.5V
Rated Power: 1000W
Limit Current: 40A
Transistor：18 tubes
48V-64V 1500W controller function：
1.LCD instrument line（1 pin,not compatible 5 pin LCD display）
2. 3-speed
3.cruise
4.self-learning
5.high brake
6.low brake
7.alarm power
8.alarm signal
9.reverse
10.throttle
11.hall
12.key lock（ battery +）
13.battery +
14.battery -
15.motor
16.pointer meter line
how to connect？
1.connect the motor line (color to color connection）
2. connect the hall line(color to color connection，if motor without hall line, don't need connect)
3. connect the battery line(2 red wires :battery + , black:battery-)
4. connect the throttle line（color to color connection）
5.off power,let two self-learning lines connect together,open power,the wheel will forward or reverse.
(1.if wheel forward ,Separate the self-learning line.
2.if wheel reverse, Separate the self-learning line.then let two self-learning line connect together again，
if wheel forward ,Separate the self-learning line.)
The self-learning step is to enable the controller to match the motor phase,adjust the direction of motor operation, and also adapt to the battery voltage
note：when use throttle control speed,two self-learning lines must separate.
6.other functions can be connected as needed.
