Apply To: the Replaceable Steel T-pins Needles Kit Fits Well for Flooring Wall Replacement Tile Leveling System; the Tile Leveling System Ensures Flatness Between Tiles Avoiding Movements During the Mortar Setting. Quality Material: the 300pcs Tile Steel Needle is Made of Stainless Steel, Which is Strong and Durable, with Good Wear Resistance, Impact Resistance, Pressure Resistance and Abrasion Resistance, and Can Serve You for a Long Time. Size: Each Replacement T-pins Steel Needle Measures about 32mm/ 1.26 inch in Length, Thickness is About 1/16 Inch/ 1.5 mm, the Right Size is Suitable for Tile Space Between 2 to 6 mm, and is Suitable for Tile Laying from 0.12" / 3 mm to 0.63" / 16 mm Thickness, Keeping the Tiles in the Same Horizontal Position and Preventing Them from Moving During the Setting Process. Installation Steps: Replaceable Tile Steel T-pin Tool is Easy to Use, Only Need to Remove the Nut Cover, Insert the T-pin Steel Needle into the Groove, Put the Red Cover into the Groove, and Tighten the Nut Cover, Please See Pic for Details.remove the T-type Straightener About 5-6 Hours After Leveling Before the Tile Binder or Cement is Completly Dried; It Will Increase Tile Installation Speed and Be More Cost Effective. This Tile Installation Tools Not Only Improves the Efficiency of the DIY and Tile Laying Process, but Also Provides You with a Perfect Tile Surface. After Having It, Reduce the Fatigue/pressure of Installers. Increase Tile Installation Speed and Be More Cost Effective.balance Tiles in the Same Horizontal Position. Specifications
Name: Steel Needles for 1/16 Tile Leveling System Kit
Material: Stainless Steel
Length of Steel Needle: 32mm/1.26"
Thickness of Steel Needle: About 1/16inch (1.5mm)
Package Includes: 300pcs Steel Needles T-pin
Features:
Easy to Use in DIY Operation:
The T-pins Steel Needles for Flooring Wall Tile Leveling System Installation Tools, Strong, Wear-resistant and Nice for DIY Operations, Which Also Can Be Easily Fixed or Removed by Wrench.
Avoid Not Removing the Tile Steel Needle T-pin:
1. Lay the First Tile, Leaving More Than 2mm (with Cross Gaskets). Close to Tile.
2. Insert Tile Steel Needle T-pins Along the Gap Between Tiles.
3. then Rotate 180 Degrees and the Tile Steel Needle is Stuck at the Bottom of the Two Tiles.
4. Adjust the Lid with a Hand/special Wrench Until the Two Tiles Are on the Same Level.
5. After Leveling, About 5-6 Hours, Before the Cement/binder is Completely Dry, Rotate the Lid in Reverse and Take out the 180 Degree Tile Steel T-pins Until the Word is Removed.
Note:
1. This Item Only Contains Steel Needles and Does Not Include a Leveler. the Leveler in the Picture is Just the Effect of Using.
2. the Colors May Exist Slight Difference Due to Different Screens.
3. Please Allow Slight Size Errors Due to Manual Measurement.