RPi Pico 2 W Microcontroller Board (with pre-soldered header (mono)), Based on Official RP2350 Chip, Dual-core & Dual-architecture Design. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz. Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2. 520KB of SRAM, and 4MB of on-board Flash memory. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Temperature sensor. 12 × Programmable I/O (PIO) state machines for custom peripheral support. Key features
Official RP2350 microcontroller chip designed by RPi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
520KB of SRAM, and 4MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Temperature sensor
12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Content
Pi Pico 2 W with pre-soldered header (mono) x1
1*3PIN yellow pin header x1
USB-A to micro USB cable ~1.2m x1