Part Numbers: 7-141 Practical Function:Replace the deteriorated worn-out OEM rubber body mount bushings, fixing the body mount issue and reducing equipment wear, vibration and noise. Improve your riding experience Package Content:Includes 8 × Upper Body Mounts (Part# 68106), 8 × Lower Body Mounts (Part# 68107), 8 × Washers (Part# 1163). Provide necessary rigidity, yet have ample resilience to keep everything quiet.Perfect for both off-road and street use Perfect Fitment:Fits for Chevy Silverado and GMC Sierra 1500 2500 2WD/4WD 1999-2014. This kit will fit for Standard Cab 2WD 4WD Silverado and Sierra 1500 with Oval Upper Mounts, which is engineered and tested to meet or exceed original part standards and performance Premium Material:These body mounts are made from high quality polyurethane and constructed with a slick black finish, anti corrosion and wear resistant to vehicle fluids and road grime Part Numbers: 7-141

Applicable Models:
Fits for Chevrolet Silverado 1500 2WD - 1500 - 1999 - 4WD - 1500 - 2014
Fits for Chevrolet Silverado 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2014
Fits for Chevrolet Silverado 2500 HD 2WD - 2500HD - 2001 thru 2WD - 2500HD - 2006
Fits for GMC Sierra 1500 2WD - 1500 - 1999 thru 4WD - 1500 - 2014
Fits for GMC Sierra 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2004

Installation :
1. Spray all mounting bolts and nuts to be removed with penetrating oil.
2. Place the vehicle body properly before removing mounts.(It is recommended that using a 2" x 4" piece of wood 24" long or any other suitable size wood between the jack and body panel to distribute the load, preventing any damage of the body panels.)If necessary, support the body in multiple areas.
3. Loosen all nuts and bolts but DON’T remove them.Work from one side of the vehicle at a time. Remove the nuts and bolts from one mount location and raise the body enough to replace the mount, NEVER HIGHTER. When raising the body, carefully check the interference problems in other parts.
4. Take one mount at a time with similar size urethane mounts.If washers/sleeves have been provided, use the original parts for installation.
5. After replacing all mounts, tighten all nuts and bolts to factory standards.

(ATTENTION PLEASE: Re-tighten all nuts and bolts after initial installation of mounts (approximately 1000 miles of driving) to ensure that all parts are not becoming loose.)