【Compatible Drones】Our repair component gimbal camera signal cable is compatible with DJI Mini 3 Pro, DJI Mini 3 and DJI Mini 4 Pro drones. It does not fit for other drone models, please note it before placing order. 【DIY Repair】When your drone falls off from the sky or hit obstacles during flight, it may damge your drone gimbal and you may receive error codes like "gimbal stuck" or gimbal does not move when restart it. These happen frequently when the coaxial wire is broken or not functioning. Sending your drone to a repair shop or after-sale center is very time-consuming and also very expensive, why not choose our cost-effective product and save your drone by yourself? We've inlcuded the needed parts and repair tools and ready for your DIY work! 【Repair Instructions】To replace the damaged gimbal signal cable, turn off your drone and use our T5 and PH1.5 screwdrivers and spudger to open the top shell of your drone. You will see the gimbal cable connector to the main board, then disconnect it carefully with our tweezer. Remove the cable from the drone middle frame slowly. Then open the gimbal upper and lower arm covers, also the camera module housiing. Disconnect all connectors with the signal cable and remove broken cable. Finally install our new coaxial cable by sequence. 【Additional Remind】Although the gimbal signal cable replacement sounds like an easy job, it is still highly suggested that watch some online tutorials or videos, especially for DIY beginners, before the repair. You will find a lot of videos online and after that you will be more knowledgeable and confident in reparing your drone gimbal. 【Packing List】1 x gimbal coaxial cable, 1 x T5 screwdriver, 1 x PH1.5 screwdriver, 1 x tweezer, 1 x double-head spudger Instructions for Mini 3 Pro gimbal signal cable replacement:

1, identify the gimbal problem and confirmed that it is from the coaxial cable.
2, watch some tutorials online firstly.
3, order our parts and tools and start DIY repair.
4, turn off the drone and remove upper shells with our PH1.5/T5 screwdrivers and spudger.
5, disconnect the gimbal signal connector to drone core board.
6, remove the broken cable from the middle frame.
7, open the gimbal covers(upper/lower arms and camera housing) with our supdger and PH1.5 screwdriver.
8, diconnect all cable connectors to gimbal motors and camera module and remove the broken cable.
9, install and connect our new gimbal signal cable step by step.